Treiber und Firmware Downloads - Lynx Studio Technology

Treiber und
FirmwareHandbücher und Dokumente Fragen und
Antworten (FAQ)Support-
formular

Treiber und Firmware Downloads

Hilo 2 USB Hilo 2 TB Hilo 2 DANTE

AllemacOSWindows

WDM / ASIO 2 / DirectSound 3.34

für Windows 10 - Build 1903 - Herausgegeben: 27.08.2019

BITTE BEACHTEN:
BEVOR Sie diesen Treiber aufspielen, muß eine evt. vorhandene ältere Version des Treibers (1.55 oder 1.63) manuell deinstalliert werden.

Diese Treiberversion ist signiert für Windows 10 Build 1903 oder niedriger.

• Release Notes

Hilo Remote Software 1.0.0.26

für Windows 7 / 8 / 10 / 11 - Herausgegeben: 25.03.2025

Setzt Hilo Firmware Version 6 (oder höher) voraus. Firmware 8 wird hierbei empfohlen.

USB: Erfordert Build 1.55 oder höher (Build 3.34 empfohlen)
Thunderbolt 1 oder 2: Erfordert Treiber der Version 20 oder höher (Build 24e empfohlen).
Thunderbolt 3: Erfordert Build 24a oder einen höheren Treiber.
Dante: Die Software "Dante Controller" muß installiert sein, damit Hilo Remote das Hilo Dante Interface finden kann.

• Release Notes

Lynx Hilo Remote

Software for Lynx Hilo

Copyright © 2012-2025 Lynx Studio Technology, Inc. All Rights Reserved.

Revision History / Release Notes

Version 1.0.26 - March 25, 2025

Fixed issue with ADAT not showing properly in some circumstances.
Unified Adapter Settings dialog box to show device serial number.

Version 1.0.25 - May 1, 2024

Added support for Hilo2
Added "Check for updates" to Menu. If a newer version of Hilo Remote is available, a popup will inform the user of the newer version and ask if the user wants to download it. If the user presses "Ignore", the popup will no longer occur until the user selects Menu > Check for updates.
Added Thunderbolt driver check to "Check for updates" function. If a newer version of the Thunderbolt driver is available, a popup will inform the user of the newer version and ask if the user wants to download it. If the user presses "Ignore", the popup will no longer occur until the user selects Menu > Check for updates.

Version 1.0.23 - July 12, 2022

Meter data are ignored for the first 125ms upon startup to avoid showing a meter deflection when none exists from hardware.
Now using JUCE 7 library.
Macintosh version now supports Apple Silicon (M1) Dante connection method.
Macintosh version now has OpenGL disabled by default since JUCE 7 now supports Metal rendering.
Macintosh version now supports macOS 10.10 and up (the oldest version of the OS supported by the Audinate Dante library).

Version 1.0.22 - July 14, 2021

Hilo Remote now uses NControl/LynxFirmware lower level code which allows for multiple Hilo's to be detected and used from different types of interfaces. Hilo's using Thunderbolt, USB and Dante interfaces can all be used at the same time.
Updated to Dante 4.4 API. Please note that Audinate does not support Dante on Apple Silicon M1 based computers. Supports Big Sur on Intel.

Version 1.0.21 - April 24, 2021

Added "Master Out" enable button on Adapter panel.
Added "Master Out" volume controls to Output panel, if enabled.

Version 1.0.20 - April 12, 2021

Universal build for Intel & Apple Silicon based computers.

Version 1.0.19 - October 11, 2019

Version 1.0.19 is now 64 bit and so is compatible with Mac Catalina.
The window does not resize automatically (if you remove LSLOT from the display, e.g.)
If Thunderbolt, there are new items under Advanced: Show PCIe Latency and Payload Size (transfer size of data).

Version 1.0.16 - March 14, 2017

Corrected issue that prevented connection to LT-DANTE with release firmware.
Added Zoom menu, with a default of Auto which follows the text size from the operating system. Menu option allows user to change the overall size of the Hilo Remote window to fit available space.
Changed SynchroLock to display 20%, 40%, 60%, 80% for working instead of 25%, 50%, 75% and 100% to match Hilo Version 8 firmware display.

Version 1.0.15 - January 11, 2017

Added support for LT-DANTE.
Removed Word Clock/2 and Word Clock/4 from the Preferred Clock Source since those are no longer valid.
Added LSlot to the Preferred Clock Source to support LT-DANTE.

Version 1.0.0.12 - November 30, 2015

Minor usability updates.

Version 1.0.0.10 - June 10, 2015

iPad version.

Version 1.0.0.9 April 29, 2015

Added RTA Meter Decay Rate to allow the user to select Slow/Medium/Fast decay rate for the RTA screen meters.
Changed RTA screen analog volume controls from knobs to sliders for easier manipulation on touch-screens.
Added Firmware Date to About Hilo Remote when using Firmware 6 or higher.

Version 1.0.0.8 - April 3, 2015

Added RTA screen. Please note that changing the meter source for the RTA screen will also update the meter source on the Hilo front panel (and vice versa).

Version 1.0.0.7 - March 6, 2015

Made compatible with new Hilo Firmware 7 metering.
Added Firmware Date to About Hilo Remote when using Firmware 7 or higher.

Version 1.0.0.6 - November 21, 2014

Added Connection menu item and dialog box. Allows user to select which connection types are allowed for Hilo Remote. For instance, if your Hilo only has a USB connection, you may uncheck the Thunderbolt and TCP/IP connection types and Hilo Remote will not try and find a Hilo using those methods.
Added Open Scene and Save Scene menu items. Allows user to save scenes to local computer storage. Please note that this does not change scene memory on the Hilo. Scene files are standard XML and can be moved from one computer to another (including between OS X and Windows).
OS X version now supports 10.6 to 10.10 and is digitally signed.
Fully supports LynxRedirector (available as a separate download). LynxRedirector allows Hilo to be remote controlled over a local or wide area network (including over the Internet). Full documentation on how to setup Hilo Remote to use LynxRedirector is included with the LynxRedirector application.

Version 1.0.0.5 - July 14, 2014

Released to specific users for testing purposes.
Hilo Remote now shows connection status in upper right portion of toolbar. Possible states are:
- Disconnected
- Connected via USB
- Connected via Thunderbolt
- Connected via TCP/IP

Version 1.0.0.4 - April 24, 2014

First release of Hilo Remote.
The Hilo must have Firmware 6 or higher for Hilo Remote to function properly.

• • •

Hilo 2 - Firmware 1.6
Updater / Version: LynxFirmware Updater 1.0.7

für Windows 10 / 11 - Herausgegeben: 30.04.2025

Der LynxFirmware Updater erfordert eine Internetverbindung, um die jeweils benötigte Firmware herunterzuladen. Bitte schließen Sie alle anderen Anwendungen, bevor Sie LynxFirmware starten.

Lynx empfiehlt, nach einem Firmware-Update die Standardeinstellungen wiederherzustellen (Function Menu > About > Select > OK).

• Release Notes

Hilo 2 Firmware Update for Windows - Release Notes

Hilo 2 Reference A/D D/A Converter System

Copyright © 1998-2025 Lynx Studio Technology, Inc. All Rights Reserved.

Revision History / Release Notes

Installation Notes
Please close all other applications before launching launching LynxFirmware.

---

LynxFirmware Updater Revision History

LynxFirmware Updater 1.0.7 - April 30, 2025

Added support for Lynx Mesa.

LynxFirmware Updater 1.0.6 - January 25, 2023

Hilo-TB now only shows the Hilo if the LT-TB is already updated to Firmware 6.5. To update the LT-TB to Firmware 6.5 makes sure to power cycle both the computer and the Hilo, then launch LynxFirmware BEFORE any other applications are loaded.

LynxFirmware Updater 1.0.5 - October 11, 2022

Updated to Dante 4.5 API. Now supports Apple Silicon based computers.

LynxFirmware Updater 1.0.4 - August 18, 2021

Updated to Dante 4.4 API. Please note that Audinate does not support Dante on Apple Silicon M1 based computers. Supports Big Sur on Intel.
Added instruction localizations in Spanish, French, Russian, Portuguese, Indonesian, Italian and German in addition to English.

LynxFirmware Updater 1.0.3 - March 06, 2021

LT-TB now has DMAV2PLUS; Added readback of clock register to allow Aurora(n) sample rate updates to be seen by driver when clocked externally.
This build includes:
AES16e: 14.1
LT-TB: 6.5
E44/E22: 2.6

Hilo 2 Firmware Revision History

Version 1.6 - January 10, 2025

Fixed issue with where Line In Trim +6dBV could not be set properly by Hilo Remote.
A>D and D>A filter item #8 to show [Min Ph Slow LD].
Hilo 2 now shows power error when Thunderbolt port requires power and no power supply is connected.

Version 1.5 - November 25, 2024

Fixed issue with Version 1.4 Firmware where scene names were cleared when a scene was restored.
The selected language is now only restored upon startup. Restoring user scenes no longer restores the language.

Version 1.4 - November 18, 2024

Fixed issue where changing language away from English may cause the Hilo 2 to start with a blank screen.
Fixed issue where pressing the standby switch while powering on from the back panel power switch (Restore Startup Defaults) would cause the Hilo 2 to start in standby mode instead of immediately powering on.

Version 1.3 - August 8, 2024

Disables D>A converter auto-mute.

Version 1.2 - July 28, 2024

Fixes low-level line input meter deflection due to DC offset. All Hilo 2 users should update to this firmware as soon as possible.

Version 1.0 - July 11, 2024

First Release

* Fußnote anzeigen/ausblenden

• • •

Wichtige Hinweise und Haftungsausschluß

Das Updaten benötigt nur wenige Minuten. Sobald der Updatevorgang erfolgreich abgeschlossen ist, müssen Sie ihren Computer herunterfahren und ausschalten bzw. Ihren Wandler vom Netz trennen, damit die neue Firmware aktiviert wird.

Sollte das Updaten fehlschlagen, schalten Sie den Computer bzw. den Wandler solange nicht aus, bis der Updatevorgang erfolgreich war. Da das Update nur aktiviert wird, wenn der Computer bzw. der Wandler ausgeschaltet war, können Sie nach einem fehlgeschlagenen Versuch den Rechner gegebenenfalls neu booten und den Updatevorgang wiederholen.

Bitte beachten: Schließen Sie alle laufenden Applikationen, bevor Sie die Firmware des Lynx Wandlers updaten. Unterbrechen oder stoppen Sie den Windows Task Scheduler (System Agent) und stellen Sie sicher, daß die Stromversorgung für Ihren Computer während des Updatevorganges nicht unterbrochen werden kann (Netzstecker überprüfen). Sollte das Updaten während des Vorganges unterbrochen werden, kann dies zu einem nicht mehr funktionierenden Lynx Wandler führen, die nur noch per kostenpflichtigem Service des Herstellers repariert werden kann.

Haftungsausschluß: Die unsachgemäße Anwendung des Firmware Updates kann dazu führen, daß Ihre Lynx Wandler anschließend nicht richtig oder nicht mehr funktioniert. Sie sollten das Update nur dann durchführen, wenn Sie sich sicher sind, daß Sie dieses fehlerfrei anwenden können. Die Firma Lynx Studio hat beim Erstellen der Update Routinen größtmögliche Sorgfalt für deren sichere Anwendung walten lassen. Dennoch übernehmen weder Lynx Studio noch Digital Broadcast Systems GmbH eine Haftung für eventuelle Schäden, die durch unsachgemäße Anwendung der Update Routinen an der Hardware- oder Software-Installation des Benutzers entstehen könnten.