Spezifikationen und Meßwerte
Analog Performance
Line In L/R
- THD+N: -113dB @1kHz, -1dBFS, 20kHz filter
- Full scale input level: +20dBu
- Dynamic range: 119dB, A-weighted, -60dBFS signal method
- Frequency response: ±0.010dB, 20-20kHz
- Crosstalk: -130dB maximum @ 1kHz, -1dBFS signal
- Common mode rejection: greater than 80dB
- Input Impedance: 200 kohms balanced, 100 kohms unbalanced
- All line input measurements made with 40 ohm source applied to input
- Gain settings: Fixed
- Connector: Female XLR on combo jack
Mic In
- Features per Channel: 48V Phantom Power Pad, Hi-Pass Filter, Polarity Reversal, 48V Lockout, Channel Pairing for Stereo Inputs
- THD+N: -111dB (0.00028%) @1kHz, -1dBFS, 20kHz filter @ 21.6dB gain
- EIN: -129dBu A-weighted, -60dBFS method
- Dynamic Range: 116dB A-weighted, -60dBFS signal method @ 21.68dB gain
- Frequency Response: +0.01 / -0.08dB max. Deviation over 20-20kHz band, -1dBFS @ all gain settings
- Crosstalk: -127dB max. Adjacent channel, -1dBFS, 1kHz @ 21.6dB gain
- Common Mode Rejection: 75dB min. -1dBFS, 60Hz and 1kHz @61.6dB gain
- Full-scale Input Level for A/D: 28.7dBu
- Input impedance: 2.1 kohms
- Gain Settings: 5.6dB or 13.6dB to 68.6dB in 1dB steps, pad disabled -8dB or 0dB to 55dB in 1dB steps, pad enabled
- Pad Attenuation: 13.6dB
- High-Pass Filter: 80Hz, 12 dB / octave
- Connector: Female XLR on combo jack
Hi-Z In
- THD+N: -109dB (0.00035%) 1kHz, -1dBFS, 20kHz filter
- EIN: -115dBu A-weighted, -60dBFS method
- Dynamic Range: 114dB A-weighted, -60dBFS method @ 21.6dB gain
- Frequency Response: +0.01 / -0.05dB max. Deviation over 20-20kHz band, -1dBFS
- Crosstalk: -132dB max. Adjacent channel, -1dBFS, 1kHz
- Full-scale Input Level for A/D: 14.9dBu @5.6dB gain
- Input impedance: 1 Mohms unbal. (TS), 2 Mohms bal. (TRS)
- Gain Settings: 5.6dB/13.6dB to 68.6dB in 1dB steps
- Connector: 1/4" TRS on combo jack
Line/Monitor Out
- THD+N: -107dB @1kHz, -1dBFS, 20kHz filter
- Dynamic range: 121dB, A-weighted, -60dBFS signal method
- Frequency response: ±0.02dB, 20-20kHz
- Crosstalk: -130dB maximum @ 1kHz, -1dBFS signal
- Output level at max: +19dBu
- Output Impedance: 0.6 ohms
- Connector: Two 1/4" TRS jacks
Headphone Out
- THD+N: -107dB @1kHz, -1dBFS, 20kHz filter, volume at max
- Dynamic range: 120dB, A-weighted, -60dBFS signal method
- Frequency response: ±0.025dB, 20-20kHz
- Crosstalk: -120dB maximum @ 1kHz, -1dBFS signal
- Output level: 18.4dBu maximum
- Output power: 68mW @ 600 ohms, 135mW @ 300 ohms, 383mW @ 60 ohms, 212mW @ 32 ohms, 100mW @ 16 ohms
- Connector: Two 1/4" stereo headphone jacks
Digital I/O
S/PDIF I/O coax:
- transformer-coupled on RCA jacks
S/PDIF I/O optical:
- on optical connectors
ADAT I/O:
- 8 channels at 48 kHz when selected on optical connectors
Other
Sample Rates
- All standard rates up to 192 kHz / 24 bits using SynchroLock 2 sample clock generator with better than 7ppm accuracy.
Synchronization Sources
- Internal
- External word clock I/O: 75 Ohm TTL signal on BNC connectors
- S/PDIF coax input
- Optical input
Computer Connectivity
- Windows 10 and Windows 11 64-bit Thunderbolt drivers provided by Lynx
- macOS 12 (Monterey) to macOS 15 (Sequoia) Thunderbolt drivers provided by Lynx
Case
- Aluminum alloy
LCD Display
- 480 x 272 IPS TFT LCD with Capacitive Touch
External Power Supply / Power Cable (included)
- AC power: 110-230 VAC, 40 watts
Shipping Size / Shipping Weight
- Size: 295 mm wide x 143 mm tall x 267 mm deep
- Shipping weigth: 2.8 kg
